Στρέψη οστού με τη δημιουργία πειραματικής διάταξης

dc.contributor.advisorΔεληγιάννη, Δέσποινα
dc.contributor.authorΜανίνος, Δημήτρης
dc.contributor.committeeΔεληγιάννη, Δέσποινα
dc.contributor.committeeΧόνδρος, Θωμάς
dc.contributor.committeeΜαυρίλας, Δημεσθένης
dc.contributor.otherManinos, dimitris
dc.date.accessioned2019-10-12T17:54:20Z
dc.date.available2019-10-12T17:54:20Z
dc.date.copyright2019-07-11
dc.degreeΔιπλωματική Εργασίαel
dc.description.abstractΗ διπλωματική εργασία αφορά την μελέτη της στρέψης του δοκιδωτού οστού καθώς και την δημιουργία ενός μηχανισμού που ήταν απαραίτητος για τη διεξαγωγή αυτού του πειράματος. Η μελέτη των μηχανικών ιδιοτήτων των οστών έχει εφαρμογές στον τομέα της ιατρικής και της δημιουργίας τεχνητών οστών. Για να προσδιοριστούν οι μηχανικές ιδιότητες των οστών πρέπει να γνωρίζουμε την συμπεριφορά τους σε στρέψη, κάμψη, θλίψη, και εφελκυσμό Ο σκοπός αυτού του πειράματος είναι ο προσδιορισμός της μέγιστης διατμητικής τάσης λόγω στρεπτικής ροπής. Στα πρώτα κεφάλαια αναφέρονται πληροφορίες για την δομή, την σύσταση, τον μηχανισμό ανάπτυξης των οστών καθώς και για την χρησιμότητα του ερειστικού συστήματος .Επίσης παρουσιάζεται η ιεραρχική δομή των οστών καθώς και λεπτομέρειες για κάθε ιεραρχικό επίπεδο. Στη συνέχεια παρουσιάζονται τα χαρακτηριστικά των δοκιδωτού οστού και μια βιβλιογραφική ανασκόπηση πάνω στην στρεπτική καταπόνησή του. Ακολούθως παρουσιάζεται ο μηχανισμός, η αρχή λειτουργίας του και τα κατασκευαστικά σχέδια όλων των τμημάτων του. Κατόπιν αναλύεται η πειραματική διαδικασία καθώς και η επεξεργασία των μετρήσεων. Τέλος, παρουσιάζονται τα αποτελέσματα του κάθε πειράματος, αλλά και συγκεντρωτικά. Στα συμπεράσματα εξηγείται η μορφή των αποτελεσμάτων αλλά και ποιοι παράγοντες συντέλεσαν σε αυτήν. Συγκριτικά με τιμές παρόμοιων πειραμάτων τα αποτελέσματα είναι λογικά και η μη γραμμικότητα των καμπυλών οφείλεται τόσο στην φύση του υλικού όσο και σε ατέλειες του μηχανισμού διεξαγωγής του πειράματος.el
dc.description.translatedabstractThe present thesis concerns the study of the torsional behavior of trabecular bone and the construction of a mechanism which was necessary for conducting the experiment. The study of bone’s mechanical properties has a variety of applications on medical field and on artificial bone creation. In order to determine the mechanical properties of the bone, we must understand its behavior under torsional, tensile, compressive and bending loads. The aim of this thesis is the measurement of the maximum shear stress under torsional loading. In the first chapters, some information on the bone’s structure and its composition, the development mechanism of the bones, and the usefulness of the skeletal system are presented. Also, the hierarchical structure of bone and details of each hierarchical level is adequately presented, as well as mechanical characteristics of trabecular bone. Moreover, a literature review was given on past torsional experiments and studies that has been carried out on trabecular bone. Afterwards, a detailed description of the mechanism, its operating principle and the design drawings of all of its parts are presented. After, an extended analysis of the experimental procedure, the processing of the experimental measurements is shown. Finally, the results of each individual experiment are presented, along with an overall analysis. In the conclusions, the experimental results are discussed and the factors which contribute to the behavior of the bone in such conditions are analyzed. The results presented in the thesis were also compared and validated with results of similar experiments, obtained from the bibliography. The non linearity of the resulted curves can be attributed on the nature of trabecular bone and the imperfections of the experimental mechanism.el
dc.identifier.urihttp://hdl.handle.net/10889/12681
dc.language.isogrel
dc.rights0el
dc.subjectΣτρέψη δοκιδωτού οστούel
dc.subjectΣπογγώδες οστόel
dc.subjectΤεχνητά οστάel
dc.subject.alternativeTorsion of trabecular boneel
dc.subject.alternativeTrabecular boneel
dc.subject.alternativeArtificial bonesel
dc.titleΣτρέψη οστού με τη δημιουργία πειραματικής διάταξηςel
dc.title.alternativeTorsional experiment on bone with the cοnstruction of an experimental mechanismel
dc.typeThesisel

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
DT_M_Μανίνος_Δημητρής_6380.pdf
Size:
1.45 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
6.2 KB
Format:
Item-specific license agreed upon to submission
Description: